Chemical diversity and antifouling activity of geniculate calcareous algae (Corallinales, Rhodophyta) from Brazil.

Marine biofouling is a natural process by which many organisms colonize and grow in submerged structures, causing serious economic consequences for the maritime industry. Geniculate calcareous algae (GCA; Corallinales, Rhodophyta) produce bioactive secondary metabolites and are a promise for new antifouling compounds. Here, we investigated the antifouling activity of four GCA species-Amphiroa beauvoisii, Jania sagittata (formerly Cheilosporum sagittatum), Jania crassa, and Jania prolifera (formerly Amphiroa flabellata)-from the Brazilian coast against macro- and microorganisms. Simultaneously, metabolomic tools were applied to assess the chemical profiles of these seaweeds using gas chromatography coupled to mass spectrometry (GC-MS). Data analysis by principal component and molecular networking analyses used the global natural products social molecular networking platform (GNPS). Our results showed that all extracts were active against different strains of marine bacteria and that the J. sagittata (JsSI) extract showed the highest percentage of bacterial inhibition. The J. sagittata (JsSI) extract was the most active against the mussel Perna perna, showing 100% byssus inhibition. Regarding toxicity, only the J. crassa (JcP) extract showed a 20% mortality rate. The chemical profiles of the evaluated GCA extracts differed qualitatively and quantitatively. Yet, the steroid (3ß)-cholest-5-en-3-ol was the major compound commonly identified in all extracts, with the exception of J. sagittata (JsSI). Moreover, we observed intra- and interspecific chemical variabilities among GCA extracts for the different populations, which could explain their antifouling activity variability. This study contributed new information about the chemical compounds produced by this group of seaweeds and showed its antifouling potential. These GCA species may be the subject of future studies to obtain new bioactive compounds with biotechnological potential in maritime areas.

Complementary Supramolecular Functionalization Enhances Antifouling Surfaces: A Ureidopyrimidinone-Functionalized Phosphorylcholine Polymer.

Fibrosis of implants remains a significant challenge in the use of biomedical devices and tissue engineering materials. Antifouling coatings, including synthetic zwitterionic coatings, have been developed to prevent fouling and cell adhesion to several implantable biomaterials. While many of these coatings need covalent attachment, a conceptually simpler approach is to use a spontaneous self-assembly event to anchor the coating to a surface. This could simplify material processing through highly specific molecular recognition. Herein, we investigate the ability to utilize directional supramolecular interactions to anchor an antifouling coating to a polymer surface containing a complementary supramolecular unit. A library of controlled copolymerization of ureidopyrimidinone methacrylate (UPyMA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) was prepared and their UPy composition was assessed. The MPC-UPy copolymers were characterized by 1H NMR, Fourier transform infrared (FTIR), and gel permeation chromatography (GPC) and found to exhibit similar mol % of UPy as compared to feed ratios and low dispersities. The copolymers were then coated on an UPy elastomer and the surfaces were assessed for hydrophilicity, protein absorption, and cell adhesion. By challenging the coatings, we found that the antifouling properties of the MPC-UPy copolymers with more UPy mol % lasted longer than the MPC homopolymer or low UPy mol % copolymers. As a result, the bioantifouling nature could be tuned to exhibit spatio-temporal control, namely, the longevity of a coating increased with UPy composition. In addition, these coatings showed nontoxicity and biocompatibility, indicating their potential use in biomaterials as antifouling coatings. Surface modification employing supramolecular interactions provided an approach that merges the simplicity and scalability of nonspecific coating methodology with the specific anchoring capacity found when using conventional covalent grafting with longevity that could be engineered by the supramolecular composition itself.

Anti-fouling potential and in-silico analysis of carotenoid and fatty acids from Rauvolfia tetraphylla L.

Study investigated the antifouling potential ofRauvolfia tetraphyllaL. fruit, leaf and stem extracts against the marine fouling organisms throughin-vitroand in-silicoapproach. Methanolic crude extract of R. tetraphylla L.leaf exhibited maximum antibacterial potential against six fouling organisms isolated from Parangipettai coast and was further taken up for column fractionation. Twenty-four fractions were obtained, among which five fractions showed inhibitory efficiency against microfoulers of Bacillus megaterium. The active compounds present in the bioactive fraction were identified by FTIR, GC-MS and NMR (13C; 1H). The bioactive compounds that exhibited maximum antifouling activity were identified as Lycopersene (80%), Hexadecanoic acid; 1, 2-Benzenedicarboxylic acid, dioctyl ester; Heptadecene - (8) - carbonic acid - (1) and Oleic acid. Molecular docking studies of the potent anti-fouling compounds Lycopersene, Hexadecanoic acid, 1, 2-Benzenedicarboxylic acid, dioctyl ester and Oleic acid showed the binding energy of 6.6, - 3.8, -5.3 and -5.9 (Kcal/mol) and hence these compounds will act as a potential biocide to control the aquatic foulers. Moreover, further studies need to carry out in terms of toxicity, field assessment and clinical trial in order to take these biocides for a patent.

Green Synthesis of TiO2 Nanoparticles Using Natural Marine Extracts for Antifouling Activity.

Titanium dioxide (TiO2) nanoparticles were synthesized via a novel eco-friendly green chemistry approach using marine natural extracts of two red algae (Bostrychia tenella and Laurencia obtusa), a green alga (Halimeda tuna), and a brown alga (Sargassum filipendula) along with a marine sponge sample identified as Carteriospongia foliascens. X-ray diffraction (XRD), scanning electron microscope (SEM), UV-Vis, X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR) were employed to characterize the crystal structure, surface morphology, and optical properties of the synthesized nanoparticles. Each of the as-synthesized marine extract based TiO2 nanoparticles was individually incorporated as an antifouling agent to form a newly fabricated marine paint formulation. The newly prepared formulations were applied on unprimed steel panels. A comparative study with a commercial antifouling paint (Sipes Transocean Coatings Optima) was carried out. After 108 days of the coated steel panels' immersion in the Eastern Harbour seawater of Alexandria-Egypt, the prepared paints using B. tenella and C. foliascens extracts demonstrated an excellent antifouling performance toward fouling organisms by inhibiting their settlement and controlling their adhesion onto the immersed panels. In contrast, heavy fouling with barnacles was observed on the surface of the coated panel with the commercial paint. The physicochemical parameters of the seawater surrounding the immersed coated panels were estimated to investigate the influence of the fabricated paint formulations. Interestingly, no effects of the immersed coated panels on the physicochemical characteristics of the surrounding seawater were observed. Based on the obtained results and a comparison with commercially available antifouling products, the marine extract based TiO2 nanoparticle preparations of B. tenella and C. foliascens are promising candidates for eco-friendly antifouling agents. Based on the obtained results and a comparison with commercially available antifouling products, the marine extract based TiO2 nanoparticle preparations of B. tenella and C. foliascens are promising candidates for eco-friendly antifouling agents, which could be attributed to the small crystallite sizes of 22.86 and 8.3 nm, respectively, in addition to the incorporation of carbon in the crystal structure of the nanoparticles.

Posidonia oceanica (L.) (Delile, 1813) extracts as a potential booster biocide in fouling-release coatings.

Since the banning of tributyltin, the addition of inorganic (metal oxides) and organic (pesticides, herbicides) biocides in antifouling paint has represented an unavoidable step to counteract biofouling and the resulting biodeterioration of submerged surfaces. Therefore, the development of new methods that balance antifouling efficacy with environmental impact has become a topic of great importance. Among several proposed strategies, natural extracts may represent one of the most suitable alternatives to the widely used toxic biocides. Posidonia oceanica is one of the most representative organisms of the Mediterranean Sea and contains hundreds of bioactive compounds. In this study, we prepared, characterized, and assessed a hydroalcoholic extract of P. oceanica and then compared it to three model species. Together, these four species belong to relevant groups of biofoulers: bacteria (Aliivibrio fischeri), diatoms (Phaeodactylum tricornutum), and serpulid polychaetes (Ficopomatus enigmaticus). We also added the same P. oceanica extract to a PDMS-based coating formula. We tested this coating agent with Navicula salinicola and Ficopomatus enigmaticus to evaluate both its biocidal performance and its antifouling properties. Our results indicate that our P. oceanica extract provides suitable levels of protection against all the tested organisms and significantly reduces adhesion of N. salinicola cells and facilitates their release in low-intensity waterflows.

Anti-quorum sensing, antibiofilm, and antibacterial activities of extracts of Centella asiatica L. leaves, and in vitro derived leaves-calli through tissue culture: a potential for biofouling-prevention.

Extracts of Centella asiatica leaves (LEs), and in-vitro leaf-calli (CEs), were investigated for antibacterial, antibiofilm, and anti-quorum sensing activities. Ethyl acetate extracts from leaves (EALE), leaf-calli (EACE), methanolic extracts from leaves (MELE), and leaf-calli (MECE) showed antibacterial activity; the minimum inhibitory concentrations (MICs) of LEs and CEs ranged from 0.312-2.50 mg ml-1 and 0.625 - 2.50 mg ml-1, respectively. The MICs of EALE and EACE were 2.50 mg ml-1, each, for C. violaceum 12742, and P. aeruginosa PAO1. At sub-MIC levels, EALE and EACE showed anti-quorum sensing (anti-QS) activity, demonstrated by concentration dependent pigment inhibition of C. violaceum 12742. Similarly, EALE and EACE inhibited QS-controlled virulence factors in P. aeruginosa PAO1 (biofilm, pyocyanin, and pyoverdin); again, the inhibition was concentration-dependent. The best effect was at immediate sub-MIC concentration i.e. 1250 µg ml-1. GC-MS analyses revealed the presence of compound 9,12-Octadecadienoic acid, and in silico docking study suggested interactions with QS-receptors CviR', LasI, and LasR proteins for anti-QS activity.

Divergent accumulation of membrane biofouling by slight elevation of nitrogen and phosphorus in drinking water treatment: Performances and mechanisms.

Membrane biofouling has been intensively investigated over many years; however, little attention has been paid to the role of slightly elevated nutrients in the fouling formation, especially during drinking water treatment. In this study, we evaluated the respective contribution of slightly elevated nitrogen (ca. 0.5 mg·L-1) and phosphorus (ca. 0.1 mg·L-1) concentrations to membrane biofouling formation and deciphered the associated mechanisms. The results demonstrated that the slight concentration elevation of nitrogen did not substantially decrease the permeate flux, but approximately 50% of the permeate flux was reduced by the elevated phosphorus. The fouling layer was thickened about 4-fold due to the slight elevation of phosphorus and this resulted in the best removal performance of fluorescent organics. In contrast, the fouling layer structure was not markedly changed by the elevated nitrogen. The concentrations of proteins and polysaccharides in the fouling layers increased to different degrees, with phosphorus playing a more pronounced role than nitrogen. The molecular experiments revealed that the filamentous Arthronema dominated the nitrogen-enriched fouling layer, but they decreased to nearly zero in the phosphorus-enriched fouling layer, and the Xanthobacter, which was capable of secreting large amounts of EPS, was enhanced. The growth of algae Chlorellales was stimulated by the elevated nitrogen, while Sphaeropleales was dominant with elevated phosphorus, and for protozoa, Vannella was increased by nitrogen, whereas members of Hartmannella were enhanced by phosphorus. Our findings indicate that the impact of slight increases in concentration of nutrients, especially phosphorus, should be taken into account in drinking water treatment.

High-strength and anti-biofouling nanofiber membranes for enhanced uranium recovery from seawater and wastewater.

Ultrathin fibers can increase the contact area between adsorbents and seawater during the uranium extraction process; however, their construction usually aggravates the complex spinning technology and lowers their mechanical strength. Meanwhile, high strength and antifouling ability are essential for ocean adsorbents to withstand the complex natural environment and microbial systems. Herein, we design high-strength and anti-biofouling poly(amidoxime) nanofiber membranes (HA-PAO NFMs) via a supramolecular crosslinking. Bacterial cellulose supplies the NFMs with ultrathin fiber structure, and large amounts of adsorption ligands are immobilized on the framework via the crosslinking with antibacterial ions. Thus, different from other fibers, HA-PAO NFMs achieve ultrathin diameter (20-30 nm), high BET area (51 m2 g-1), and excellent mechanical strength (13.6 MPa). The uranium adsorption capacity reaches to 409 mg-U/g-Ads in the simulated seawater, 99.2% uranium can be removed from the U-contained wastewater, and the adsorption process can be observed by the naked eye due to the significant color changes. The inhibition zones indicate their excellent anti-biofouling ability, which contributes to 1.83 times more uranium extraction amount from natural seawater than the non-antifouling adsorbents. Furthermore, they display a long service life and can be large-scale prepared, and the HA-PAO NFMs have potential in the massive uranium recovery.

Mussel-inspired polydopamine microspheres self-adhered on natural hemp fibers for marine uranium harvesting and photothermal-enhanced antifouling properties.

The rapid development of nuclear energy and the accelerated consumption of uranium (U(VI)) ores have forced researchers to turn to marine U(VI) harvesting. However, the performance of marine U(VI) harvesting materials was challenged by the combination of ultralow concentrations of U(VI), high concentrations of various interfering ions and biofouling from abundant marine living organisms. Natural abundant hemp fibers (HFs) were adhered by mussel-inspired polydopamine microspheres (HFMPDA) during self-polymerization. Both HFs and PDA are derived from natural products with low-cost and eco-friendly properties to guarantee compatibility with biological marine environments. HFMPDA exhibits an outstanding distribution coefficient of 10.51 ± 0.51 L g-1 for U(VI) and great fouling resistance. The coordination forms between the U(VI) ion and HFMPDA were investigated by density functional theory (DFT), and the antifouling property was simulated by molecular dynamics (MD) calculations. The adsorption capacity of HFMPDA is 128.43 ± 3.26 µg g-1, which is 1.75 and 6.05 times higher than that of HFPDA (only covered by PDA) and V(V), respectively, after immersion for 34 days in the Yellow Sea, China. These polydopamine microspheres adhered to HF will be a photothermal marine U(VI) harvesting material with enhanced selectivity and fouling resistance.

Slippery Antifouling Polymer Coatings Fabricated Entirely from Biodegradable and Biocompatible Components.

We report the design of slippery liquid-infused porous surfaces (SLIPS) fabricated from building blocks that are biodegradable, edible, or generally regarded to be biocompatible. Our approach involves infusion of lubricating oils, including food oils, into nanofiber-based mats fabricated by electrospinning or blow spinning of poly(ε-caprolactone), a hydrophobic biodegradable polymer used widely in medical implants and drug delivery devices. This approach leads to durable and biodegradable SLIPS that prevent fouling by liquids and other materials, including microbial pathogens, on objects of arbitrary shape, size, and topography. This degradable polymer approach also provides practical means to design "controlled-release" SLIPS that release molecular cargo at rates that can be manipulated by the properties of the infused oils (e.g., viscosity or chemical structure). Together, our results provide new designs and introduce useful properties and behaviors to antifouling SLIPS, address important issues related to biocompatibility and environmental persistence, and thus advance new potential applications, including the use of slippery materials for food packaging, industrial and marine coatings, and biomedical implants.

The Microbial Mechanisms of a Novel Photosensitive Material (Treated Rape Pollen) in Anti-Biofilm Process under Marine Environment.

Marine biofouling is a worldwide problem in coastal areas and affects the maritime industry primarily by attachment of fouling organisms to solid immersed surfaces. Biofilm formation by microbes is the main cause of biofouling. Currently, application of antibacterial materials is an important strategy for preventing bacterial colonization and biofilm formation. A natural three-dimensional carbon skeleton material, TRP (treated rape pollen), attracted our attention owing to its visible-light-driven photocatalytic disinfection property. Based on this, we hypothesized that TRP, which is eco-friendly, would show antifouling performance and could be used for marine antifouling. We then assessed its physiochemical characteristics, oxidant potential, and antifouling ability. The results showed that TRP had excellent photosensitivity and oxidant ability, as well as strong anti-bacterial colonization capability under light-driven conditions. Confocal laser scanning microscopy showed that TRP could disperse pre-established biofilms on stainless steel surfaces in natural seawater. The biodiversity and taxonomic composition of biofilms were significantly altered by TRP (p < 0.05). Moreover, metagenomics analysis showed that functional classes involved in the antioxidant system, environmental stress, glucose−lipid metabolism, and membrane-associated functions were changed after TRP exposure. Co-occurrence model analysis further revealed that TRP markedly increased the complexity of the biofilm microbial network under light irradiation. Taken together, these results demonstrate that TRP with light irradiation can inhibit bacterial colonization and prevent initial biofilm formation. Thus, TRP is a potential nature-based green material for marine antifouling.

Amidoxime Group-Anchored Single Cobalt Atoms for Anti-Biofouling during Uranium Extraction from Seawater.

Marine biofouling is one of the most significant challenges hindering practical uranium extraction from seawater. Single atoms have been widely used in catalytic applications because of their remarkable redox property, implying that the single atom is highly capable of catalyzing the generation of reactive oxygen species (ROS) and acts as an anti-biofouling substance for controlling biofouling. In this study, the Co single atom loaded polyacrylamidoxime (PAO) material, PAO-Co, is fabricated based on the binding ability of the amidoxime group to uranyl and cobalt ions. Nitrogen and oxygen atoms from the amidoxime group stabilize the Co single atom. The fabricated PAO-Co exhibits a broad range of antimicrobial activity against diverse marine microorganisms by producing ROS, with an inhibition rate up to 93.4%. The present study is the first to apply the single atom for controlling biofouling. The adsorbent achieves an ultrahigh uranium adsorption capacity of 9.7 mg g-1 in biofouling-containing natural seawater, which decreased only by 11% compared with that in biofouling-removed natural seawater. These findings indicate that applying single atoms would be a promising strategy for designing biofouling-resistant adsorbents for uranium extraction from seawater.

Natural Benzo/Acetophenones as Leads for New Synthetic Acetophenone Hybrids Containing a 1,2,3-Triazole Ring as Potential Antifouling Agents.

Marine biofouling is a natural process that represents major economic, environmental, and health concerns. Some booster biocides have been used in biofouling control, however, they were found to accumulate in environmental compartments, showing negative effects on marine organisms. Therefore, it is urgent to develop new eco-friendly alternatives. Phenyl ketones, such as benzophenones and acetophenones, have been described as modulators of several biological activities, including antifouling activity (AF). In this work, acetophenones were combined with other chemical substrates through a 1,2,3-triazole ring, a strategy commonly used in Medicinal Chemistry. In our approach, a library of 14 new acetophenone-triazole hybrids was obtained through the copper(I)-catalyzed alkyne-azide cycloaddition "click" reaction. All of the synthesized compounds were evaluated against the settlement of a representative macrofouling species, Mytilus galloprovincialis, as well as on biofilm-forming marine microorganisms, including bacteria and fungi. The growth of the microalgae Navicula sp. was also evaluated after exposure to the most promising compounds. While compounds 6a, 7a, and 9a caused significant inhibition of the settlement of mussel larvae, compounds 3b, 4b, and 7b were able to inhibit Roseobacter litoralis bacterial biofilm growth. Interestingly, acetophenone 7a displayed activity against both mussel larvae and the microalgae Navicula sp., suggesting a complementary action of this compound against macro- and microfouling species. The most potent compounds (6a, 7a, and 9a) also showed to be less toxic to the non-target species Artemia salina than the biocide Econea®. Regarding both AF potency and ecotoxicity activity evaluation, acetophenones 7a and 9a were put forward in this work as promising eco-friendly AF agents.

Universal Antifouling and Photothermal Antibacterial Surfaces Based on Multifunctional Metal-Phenolic Networks for Prevention of Biofilm Formation.

Biofilms formed from the pathogenic bacteria that attach to the surfaces of biomedical devices and implantable materials result in various persistent and chronic bacterial infections, posing serious threats to human health. Compared to the elimination of matured biofilms, prevention of the formation of biofilms is expected to be a more effective way for the treatment of biofilm-associated infections. Herein, we develop a facile method for endowing diverse substrates with long-term antibiofilm property by deposition of a hybrid film composed of tannic acid/Cu ion (TA/Cu) complex and poly(ethylene glycol) (PEG). In this system, the TA/Cu complex acts as a multifunctional building block with three different roles: (i) as a versatile "glue" with universal adherent property for substrate modification, (ii) as a photothermal biocidal agent for bacterial elimination under irradiation of near-infrared (NIR) laser, and (iii) as a potent linker for immobilization of PEG with inherent antifouling property to inhibit adhesion and accumulation of bacteria. The resulted hybrid film shows negligible cytotoxicity and good histocompatibility and could prevent biofilm formation for at least 15 days in vitro and suppress bacterial infection in vivo, showing great potential for practical applications to solve the biofilm-associated problems of biomedical materials and devices.

Polyguanidine-modified adsorbent to enhance marine applicability for uranium recovery from seawater.

The marine applicability of adsorbents intended for recovering uranium from seawater is crucial. For such applicability, the materials must exhibit anti-biofouling properties, seawater pH adaptability (pH~8), and salt tolerance. Extracting uranium from seawater is a long-term project; hence, biofouling, high salt concentrations, and weak alkaline environments negatively affect the adsorption of uranium and damage the recovered materials. Most studies on the extraction of uranium from seawater focus on increasing the adsorption capacity of the employed adsorbent, while its marine applicability is neglected. In the present study, three types of guanidine polymer (GP)-modified acrylic fibers were prepared to investigate the impact of the introduced structure on the marine applicability of the fibers. After screening, the introduction of polyhexamethylene biguanidine (PHMB) is observed to produce PAO-PHMB-A, characterized by excellent marine applicability. The enhanced properties include high antimicrobial activity (109 CFU/mL, 99.71%), good salt tolerance, and optimal adsorption at a pH of 8. Owing to the synergistic effect of its functional groups, the PAO-PHMB-A material exhibits excellent adsorption performance (525.89 mg/g), as well as high selectivity and durability. More importantly, long-term marine tests revealed that PAO-PHMB-A shows a remarkable uranium adsorption capacity (30 d, 3.19 mg/g) and excellent antibacterial activity. Considering its excellent marine applicability and good adsorption performance, the PAO-PHMB-A material developed in this work could serve as a potential adsorbent for engineering applications associated with uranium recovery from seawater.

Facile deposition of biogenic silver nanoparticles on porous alumina discs, an efficient antimicrobial, antibiofilm, and antifouling strategy for functional contact surfaces.

Surface modification is an emerging strategy for the design of contact materials. Fabricated alumina discs were functionalized by deposition of biogenic silver nanoparticles. The surfaces were characterized for physico-chemical, antibacterial and antibiofilm properties against microbial pathogens. The surface demonstrated improved hydrophobicity and a surface silver nanoparticle content of 6.4 w%. A reduction of more than 99.9% in CFU mL-i was observed against the Gram-positive and Gram-negative bacteria tested, with >90% reduction of the fungal isolate. After 4 h, microbial adhesion was reduced by >99.9 and 90% for Escherichia coli and Staphylococcus aureus, respectively. Scanning electron micrographs further revealed a biofilm reduction. Cell viability tests indicated a bioincompatibility higher than 80% with Caco-2 and HaCaT cell lines after 48 h contact. The results suggest that deposition of biogenic silver nanoparticles on the surface of contact materials could be employed as a strategy to prevent biofilm formation.

Antibiofouling Ultrathin Poly(amidoxime) Membrane for Enhanced U(VI) Recovery from Wastewater and Seawater.

Although eco-friendly amidoxime-based adsorbents own an excellent uranium (U)-adsorption capacity, their U-adsorption efficiency is commonly reduced and even damaged by the biological adhesion from bacteria/microorganisms in an aqueous environment. Herein, we present an antibiofouling ultrathin poly(amidoxime) membrane (AUPM) with highly enhanced U-adsorption performance, through dispersing the quaternized chitosan (Q-CS) and poly(amidoxime) in a cross-linked sulfonated cellulose nanocrystals (S-CNC) network. The cross-linked S-CNC not only can elevate the hydrophilicity to improve the U-adsorption efficiency of AUPM but also can enhance the mechanical strength to form a self-supporting ultrathin membrane (17.21 MPa, 10 µm thickness). More importantly, this AUPM owns a good antibiofouling property, owing to the broad-spectrum antibacterial quaternary ammonium groups of the Q-CS. As a result, within the 1.00 L of low-concentration (100 ppb) U-added pure water (pH ≈ 5) and seawater (pH ≈ 8) for 48 h, 30 mg of AUPM can recover 93.7% U and 91.4% U, respectively. Furthermore, compared with the U-absorption capacity of a blank membrane without the Q-CS, that of AUPM can significantly increase 37.4% reaching from 6.39 to 8.78 mg/g after being in natural seawater for only 25 d. Additionally, this AUPM can still maintain almost constant tensile strength during 10 cycles of adsorption-desorption, which indicates the relatively long-term usability of AUPM. This AUPM will be a promising candidate for highly efficient and large-scale U-recovery from both U-containing waste freshwater/seawater and natural seawater, which will be greatly helpful to deal with the U-pollution and enrich U for the consumption of nuclear power. More importantly, the work will provide a new convenient but universal strategy to fabricate new highly enhanced low-cost U-adsorbents, through the introduction of both an antibacterial property and a high mechanical performance, which will be a good reference for the design of new highly efficient U-adsorbents.

The impacts of biofouling on automated phosphorus analysers during long-term deployment.

In-situ nutrient analysers are a promising tool for improving the temporal resolution of data and filling knowledge gaps in drivers of harmful algal blooms. There are significant challenges however regarding instrument biofouling and data drift, which remain largely unquantified and unresolved. In this study the effects of biofouling on data consistency and accuracy is quantified on automated wet chemical analysers during long-term monitoring. In 2019 three fractions of phosphorus (P); total phosphorus (TP), total dissolved phosphorus (TDP) and soluble reactive phosphorus (SRP), were measured in-situ at four sites in Southern Ontario, Canada. The analysers were exposed to a wide range of P concentrations and biofouling extremes over an 8-month period. They were calibrated using chemical standards both in the field and the lab, and validated with fortnightly grab samples, and the representativeness of real-time data under a range of biofouling conditions were analysed. Results show that analysers biofouling during long-term deployment can desensitize instrument measurements, with greatest impacts on instruments operating in highly turbid environments. Temporal changes in calibration curves suggest that equilibrium P concentrations (EPC0) of sediments accumulating inside filters can elicit a rapid exchange of dissolved P (SRP, TDP) with the water sample. Data drift increases the further from the EPC0 an instrument is required to analyse, and thus this study demonstrates that for in-situ P monitoring, unless filters are frequently replaced or renovated, in-situ probes should ideally be dedicated to a specific waterbody type defined by similar EPC0 values. It is recommended that in order to ensure accuracy in in-situ monitoring of TP, TDP and SRP during long-term deployment, preliminary site trials should be conducted to ascertain sediment EPC0; the extent of biofouling should be monitored; and/or frequent grab samples taken for post-deployment validation. The findings apply to any in-situ phosphorus monitoring techniques for SRP or TDP.

Antifouling Dendrimer-Entrapped Copper Sulfide Nanoparticles Enable Photoacoustic Imaging-Guided Targeted Combination Therapy of Tumors and Tumor Metastasis.

The development of functional intelligent theranostic nanoplatform for imaging-directed synchronous inhibition of primary tumor and tumor metastasis is still a challenging task. We present here the creation of functional dendrimer-entrapped CuS nanoparticles (CuS DENPs) complexed with plasmid DNA-encoding hypermethylation in cancer 1 (pDNA-HIC1) for photoacoustic (PA) imaging-directed simultaneous inhibition of tumors and tumor metastasis. Poly(amidoamine) dendrimers of generation 5 were covalently attached with 1,3-propane sultone and arginine-glycine-aspartic acid (RGD) peptide through a spacer of poly(ethylene glycol) and adopted for the templated synthesis of CuS NPs. The prepared functional RGD-CuS DENPs possess a mean CuS core diameter of 4.2 nm, good colloidal stability, and an excellent absorption feature in the second near-infrared window, thus having a photothermal conversion efficiency of 49.8% and an outstanding PA imaging capability. The functional DENPs can effectively deliver pDNA-HIC1 to prevent cancer cell invasion and metastasis in a serum-enhancing manner by virtue of zwitterionic modification-rendered antifouling property. The developed RGD-CuS DENPs/pDNA polyplexes display αvß3 integrin-targeted enhanced anticancer activity through the combined CuS NP-mediated photothermal therapy (PTT) and pDNA delivery-rendered cancer cell metastasis inhibition. This can also be proven by the therapeutic efficacy of a triple-negative breast cancer model in vivo, where inhibition of both the primary subcutaneous tumor and lung metastasis can be realized. The created dendrimer-CuS hybrid nanoplatform represents one of the updated designs of nanomedicine for PA imaging-directed combination PTT/gene therapy of tumors and tumor metastasis.

Effect of phosphate availability on biofilm formation in cooling towers.

Phosphate limitation has been suggested as a preventive method against biofilms. P-limited feed water was studied as a preventive strategy against biofouling in cooling towers (CTs). Three pilot-scale open recirculating CTs were operated in parallel for five weeks. RO permeate was fed to the CTs (1) without supplementation (reference), (2) with supplementation by biodegradable carbon (P-limited) and (3) with supplementation of all nutrients (non-P-limited). The P-limited water contained ≤10 µg PO4 l-1. Investigating the CT-basins and coupons showed that P-limited water (1) did not prevent biofilm formation and (2) resulted in a higher volume of organic matter per unit of active biomass compared with the other CTs. Exposure to external conditions and cycle of concentration were likely factors that allowed a P concentration sufficient to cause extensive biofouling despite being the limiting compound. In conclusion, phosphate limitation in cooling water is not a suitable strategy for CT biofouling control.